Search results for "Monte Carlo [numerical calculations]"

showing 10 items of 1340 documents

Study of the helium-cooled lithium lead test blanket module nuclear behaviour under irradiation in ITER

2009

Abstract The present paper deals with the detailed investigation of the helium-cooled lithium lead test blanket module (HCLL-TBM) nuclear behaviour under irradiation in ITER, carried out at the Department of Nuclear Engineering of the University of Palermo adopting a numerical approach based on the Monte Carlo method. A realistic 3D heterogeneous model of the HCLL-TBM was set-up and inserted into an ITER 3D semi-heterogeneous model that realistically simulates the reactor lay-out up to the cryostat. A Gaussian-shaped neutron source was adopted for the calculations. The main features of the HCLL-TBM nuclear response were assessed, paying a particular attention to the neutronic and photonic d…

CryostatNeutron transportTokamakMaterials scienceMechanical EngineeringNuclear engineeringchemistry.chemical_elementFusion powerBlanketHCLL test blanket module Neutronics Monte Carlo methodlaw.inventionNuclear physicsNuclear Energy and EngineeringchemistrylawNeutron sourceGeneral Materials ScienceLithiumSettore ING-IND/19 - Impianti NucleariHeliumCivil and Structural EngineeringFusion Engineering and Design
researchProduct

The liquid-solid transition of hard discs: first-order transition or Kosterlitz-Thouless-Halperin-Nelson-Young scenario?

2002

We consider the question of whether a two-dimensional hard-disc fluid has a first-order transition from the liquid state to the solid state as in the three-dimensional melting-crystallization transition or whether one has two subsequent continuous transitions, from the liquid to the hexatic phase and then to the solid phase, as proposed by Kosterlitz, Thouless, Halperin, Nelson and Young (KTHNY). Monte Carlo (MC) simulations of the fluid that study the growth of the bond orientational correlation length, and of the crystal are discussed. The emphasis is on a recent consistency test of the KTHNY renormalization group (RG) scenario, where MC simulations are used to estimate the bare elastic c…

CrystalPhysicsCondensed matter physicsFlow (mathematics)Phase (matter)Monte Carlo methodThermodynamicsGeneral Materials ScienceDislocationRenormalization groupCondensed Matter PhysicsClassical XY modelHexatic phaseJournal of Physics: Condensed Matter
researchProduct

On melting of two-dimensional monolayer films

1996

The melting of two-dimensional films formed on the (100) fcc crystal is studied by Monte Carlo simulation. The results obtained suggest that in systems with only weakly corrugated surface potential, exhibiting the hexagonal close packed solid structure, the melting transition is followed by the lsing-like transition as predicted by the theory of Nelson and Halperin. In the case of highly corrugated surface potential, the film forms registered structure which disorders gradually as the temperature is raised.

CrystalSurface (mathematics)Materials scienceSolid structureCondensed matter physicsCondensed Matter::SuperconductivityMonte Carlo methodMonolayerClose-packing of equal spheresGeneral Physics and Astronomy
researchProduct

Measurement of dijet production with a veto on additional central jet activity in pp collisions at sqrt(s)=7 TeV using the ATLAS detector

2011

A measurement of jet activity in the rapidity interval bounded by a dijet system is presented. Events are vetoed if a jet with transverse momentum greater than 20 GeV is found between the two boundary jets. The fraction of dijet events that survive the jet veto is presented for boundary jets that are separated by up to six units of rapidity and with mean transverse momentum 50 < p¯T < 500 GeV. The mean multiplicity of jets above the veto scale in the rapidity interval bounded by the dijet system is also presented as an alternative method for quantifying perturbative QCD emission. The data are compared to a next-to-leading order plus parton shower prediction from the powheg-box, an all-order…

DIJETSParticle physicsNuclear and High Energy Physics:Mathematics and natural science: 400::Physics: 430 [VDP]Ciências Naturais::Ciências FísicasAtlas detectorAstrophysics::High Energy Astrophysical Phenomena:Ciências Físicas [Ciências Naturais]Monte Carlo methodFOS: Physical sciencesddc:500.2:Mathematics and natural science: 400::Physics: 430::Nuclear and elementary particle physics: 431 [VDP]01 natural sciences530High Energy Physics - ExperimentNuclear physicsHigh Energy Physics - Experiment (hep-ex)0103 physical sciences[PHYS.HEXP]Physics [physics]/High Energy Physics - Experiment [hep-ex]Rapidityddc:530High Energy PhysicsResummation010306 general physicsParton showerNuclear ExperimentPhysicsScience & TechnologyHadron-Hadron Scattering010308 nuclear & particles physicsSettore FIS/01 - Fisica SperimentaleHigh Energy Physics::PhenomenologyPerturbative QCDATLASBounded functionHADRON-HADRON COLLISIONSTransverse momentumFísica nuclearHigh Energy Physics::ExperimentLHCParticle Physics - Experiment
researchProduct

Uncertainty evaluation in power measurements with commercial data acquisition boards

2011

The paper deals with the metrological characterization of a digital wattmeter developed by using a personal computer, a shunt, two commercial data acquisition boards and commercial software. The uncertainty of the active power measurements is assessed individually characterizing the voltage channel, the current channel and the phase displacement measurement between the two channels. In particular, the uncertainty on the voltage and current rms measurements is evaluated by using an already proposed approach based on the Monte Carlo method and on the usage of five parameters, while the uncertainty on the phase angle is experimentally estimated. In order to validate the proposed approach for t…

Data acquisition boardTwo channelData acquisitionMonte Carlo methodsUncertainty evaluationCommercial softwareNational standardPC-basedPersonal computerspower measurements data acquisition wattmeters uncertainty evaluation PC-based instrumentsActive-power measurementsUncertainty analysisSettore ING-INF/07 - Misure Elettriche E ElettronicheMetrological characterizationPhase anglesWattmeters
researchProduct

Fluids of hard ellipsoids: Phase diagram including a nematic instability from Percus-Yevick theory

1999

An important aspect of molecular fluids is the relation between orientation and translation parts of the two-particle correlations. Especially the detailed knowledge of the influence of orientation correlations is needed to explain and calculate in detail the occurrence of a nematic phase. The simplest model system which shows both orientation and translation correlations is a system of hard ellipsoids. We investigate an isotropic fluid formed of hard ellipsoids with Percus-Yevick theory. Solving the Percus-Yevick equations self-consistently in the high density regime gives a clear criterion for a nematic instability. We calculate in detail the equilibrium phase diagram for a fluid of hard …

DiagramIsotropyMonte Carlo methodFOS: Physical sciencesCondensed Matter - Soft Condensed MatterInstabilityCondensed Matter::Soft Condensed MatterClassical mechanicsLiquid crystalOrientation (geometry)Phase (matter)Soft Condensed Matter (cond-mat.soft)Statistical physicsPhase diagramMathematicsPhysical Review E
researchProduct

Non-Homogeneity of Lateral Resolution in Integral Imaging

2013

We evaluate the lateral resolution in reconstructed integral images. Our analysis takes into account both the diffraction effects in the image capture stage and the lack of homogeneity and isotropy in the reconstruction stage. We have used Monte Carlo simulation in order to assign a value for the resolution limit to any reconstruction plane. We have modelled the resolution behavior. Although in general the resolution limit increases proportionally to the distance to the lens array, there are some periodically distributed singularity planes. The phenomenon is supported by experiments.

DiffractionPhysicsIntegral imagingbusiness.industryIsotropyMonte Carlo methodIterative reconstructionCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsSingularityOpticsHomogeneity (physics)Electrical and Electronic EngineeringbusinessImage resolutionJournal of Display Technology
researchProduct

Magic numbers, excitation levels, and other properties of small neutral math clusters (N < 50)

2006

The ground-state energies and the radial and pair distribution functions of neutral math clusters are systematically calculated by the diffusion Monte Carlo method in steps of one math atom from 3 to 50 atoms. In addition the chemical potential and the low-lying excitation levels of each cluster are determined with high precision. These calculations reveal that the “magic numbers” observed in experimental math cluster size distributions, measured for free jet gas expansions by nondestructive matter-wave diffraction, are not caused by enhanced stabilities. Instead they are explained in terms of an enhanced growth due to sharp peaks in the equilibrium concentrations in the early part of the e…

DiffusionHelium neutral atoms ; Atomic clusters ; Ground states ; Excited states ; Chemical potential ; Diffusion ; Monte Carlo methods ; Molecular configurationsHelium neutral atomsAtomic clustersExcited statesMonte Carlo methods:FÍSICA::Química física [UNESCO]Chemical potentialMolecular configurationsGround statesUNESCO::FÍSICA::Química física
researchProduct

Inspirations for EO polymer design gained from modeling of chromophore poling by Langevin dynamics

2013

One of the possibilities to create organic molecular material for NLO applications are polymers with dispersed NLO active chromophores. These molecules must be acentrically ordered by applying an external electric poling field. The NLO efficiency depends on dipole moment, molecular hyperpolarizabilities, concentration of the chromophores and external poling field strength. Calculating, from first principles, the extent of the alignment and via this NLO efficiency has proven to be challenging. One approach to solve this problem is pure analytic statistical mechanics treatment, what could be enhanced by Monte Carlo ( MC ) statistical mechanical modelling. The chromophore molecules usually hav…

DipoleClassical mechanicsMaterials scienceChemical physicsPolingMonte Carlo methodField strengthStatistical mechanicsChromophoreLangevin dynamicsForce field (chemistry)SPIE Proceedings
researchProduct

Shear moduli of two dimensional binary glasses

2012

The shear moduli of two-component glasses in two dimensions are studied within mode coupling theory. Varying the concentration, strong mixing effects are observed along the glass transition lines for two interaction potentials. Nonoverlapping disks with size ratios between 0.3 and 0.9, and point particles interacting with (magnetic) dipoles of strength ratio between 0.1 and 0.6 are considered. Equilibrium structure factors (partially obtained from Monte Carlo simulations) and glass form factors, and perturbative calculations show that a softening of the elastic shear constant of glass upon adding another component arises from a dilution effect of the majority component. For very disparate m…

DipoleMaterials scienceShear (geology)Condensed matter physicsMonte Carlo methodMode couplingBinary numberddc:530General ChemistryCondensed Matter PhysicsGlass transitionSofteningModuli
researchProduct